26
27
pROGRAM SCHEDUlE AND HOlDS
press [Next]
, then
[fAN]
to set the fan mode of the
first event .
CHANGING pROGRAM SCHEDUlES
(CONTINUED)
press
[Next]
to advance to the next event .
repeat above process for each remaining event.
press
[DONE]
to save the schedule for the day .
The thermostat will display the CoPy option.
press
[COpy]
to copy the schedule of the day just
programmed to any other day .
OR
press
[CANCEl]
to proceed to the next day and repeat
the above process.
pROGRAM SCHEDUlE AND HOlDS
TEMpORARy pROGRAM HOlD
press
or
to immediately adjust the temperature
when the schedule is running . This will temporarily hold
the temperature setting until the next scheduled event .
pROGRAM SCHEDUlE HOlDS
– TEMpORARy
Heat Blast
™
will raise the current room temperature 3°F
to 5°f based on the installer set-up, and then resume
normal operation .
press [Heat Blast]
to activate Heat Blast .
Note:
Heat Blast button is only available if it is enabled
in the Installer Setup and the thermostat is in Heat or
Emergency Heat mode .
To cancel Heat Blast
press [CANCEl]
, or
[Heat Blast]
, or the
temperature adjust
buttons.
HEAT BlAST
™
