6
PROGRAMMING YOUR THERMOSTAT
(CONTINUED)
ENTERING YOUR PROGRAM
Follow these steps to enter the heating and cooling programs you
have selected.
Set Current Time and Day
1. Press TIME button once. The display will show the hour only.
EXAMPLE:
2. Press and hold either
or
until you reach the correct
hour and AM/PM designation (
AM
begins at midnight;
PM
begins
at noon).
3. Press TIME once. The display window will show the minutes only.
EXAMPLE:
4. Press and hold either
or
until you reach the correct
minutes.
5. Press TIME once. The display will show the day of the week.
6. Press
or
until you reach the current day of the week.
7. Press RUN once. The display will show the correct time and room
temperature alternately.
ENTER HEATING PROGRAM
1. Move the SYSTEM switch to
HEAT
.
2. Press PRGM once. “
MO TU WE TH FR
” (indicating weekday
program) will appear in the display. Also displayed are the currently
programmed start time for the
1st heating
period and the currently
programmed temperature (fl ashing).
EXAMPLE:
This display window shows that for the 1st weekday period, the
start time is 6:00 AM, and 70° is the programmed temperature
(this example refl ects factory preprogramming).
3. Press
or
to change the displayed temperature to your
selected temperature for the 1st heating program period.
4. Press TIME once (the programmed time will fl ash). Press
or
until your selected time appears. The time will change in
15 minute increments. When your selected time is displayed, press
TIME again to return to the change temperature mode.
5. Press PRGM once. The currently programmed start time and setpoint
temperature for the
2nd heating
program period will appear.
6. Repeat steps 4 and 5 to select the start time and heating
temperature for the 2nd heating program period.
7. Repeat steps 4 through 6 for the 3rd and 4th heating program
periods. Weekday heating programs are now complete.
8. Press PRGM once. “
SA SU
” (indicating weekend program) will
appear in the display, along with the start time for the 1st heating
period and the currently programmed temperature.
9. Repeat steps 4 through 8 to complete weekend heating
programming.
10. When you have completed entering your heating program,
press RUN.
ENTER COOLING PROGRAM
If the outside temperature is below 50°F, disconnect power
to the cooling system before programming. Energizing the
air conditioner compressor during cold weather may cause
personal injury or property damage.
1. Move SYSTEM switch to
COOL
position.
2. Follow the procedure for entering your heating program, using
your selected cooling times and temperatures.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat programming one fi nal
time before beginning thermostat operation.
1. Move SYSTEM switch to
HEAT
position.
2. Press PRGM to view the 1st weekday heating period time and
temperature. Each time you press PRGM, the next heating period
time and temperature will be displayed in sequence for weekday,
then weekend program periods (you may change any time or
temperature during this procedure).
3. Press RUN.
4. Move SYSTEM switch to
COOL
position.
5. Repeat step 2 to check cooling temperatures.
6. Press RUN to begin program operation.
YOUR THERMOSTAT IS NOW FULLY PROGRAMMED AND
READY TO AUTOMATICALLY PROVIDE MAXIMUM COMFORT
AND EFFICIENCY!
Heating/Cooling Schedule Plan (Factory Program)
Period
Weekday (5 Day)
Weekend (2 Day)
Start Time
Temperature
Start Time
Temperature
HEA
T
1ST
6:00 AM
70°F
6:00 AM
70°F
2ND
8:00 AM
62°F
8:00 AM
62°F
3RD
5:00 PM
70°F
5:00 PM
70°F
4TH
10:00 PM
62°F
10:00 PM
62°F
COOL
1ST
6:00 AM
78°F
6:00 AM
78°F
2ND
8:00 AM
85°F
8:00 AM
85°F
3RD
5:00 PM
78°F
5:00 PM
78°F
4TH
10:00 PM
82°F
10:00 PM
82°F
My Heating/Cooling Schedule Plan
Period
Weekday (5 Day)
Weekend (2 Day)
Start Time
Temperature
Start Time
Temperature
HEA
T
1ST
2ND
3RD
4TH
COOL
1ST
2ND
3RD
4TH
