background image

1

8081 TT / 8082 TrH 

Support Module

READ AND SAVE THESE INSTRUCTIONS

Installation Instructions

FEATURES

•  1 on board temperature sensor
•  1 on board and one remote temperature sensor*
•  1 remote temperature sensor*
•  2 remote temperature sensors*

The 8081 TT/ 8082 TrH Support Modules are designed to work with the Model 8800 Universal Communicating Thermostat.  
Up to four support modules per thermostat can be used to monitor temperature and/or humidity in various rooms or throughout 
a larger area. The temperatures or humidity readings can also be averaged to create a controlling value for the thermostat.

MODEl 8081 TT OpTIONS

* For remote temperature sensors use the Aprilaire Model 8051 Flush Mount Temperature Sensor, Model 8052 Duct/Outdoor 

Temperature Sensor, or the Model 8053 Surface Mount Temperature Sensor.

•  1 on board humidity sensor and 1 on board 

temperature sensor

•  1 on board humidity sensor and 1 remote 

temperature sensor*

MODEl 8082 TrH OpTIONS

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installation location recommendations. . . . . . . . . . . . . 2
Support module mounting . . . . . . . . . . . . . . . . . . . . . . . 2
Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-4

TAblE OF CONTENTS

Dip switch configuration . . . . . . . . . . . . . . . . . . . . . .

5-6

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Содержание 8081 TT






Отзывы: