Apricorn EZ Writer, Руководство пользователя

Страница: 4 / 20

The Leader in Personal Storage
4
Introduction
EZ Writer has the following features:

Attaches through the USB (Universal Serial Bus) interface, the specification
of the interface must meet:
USB 1.1 (Data Transfer Rate = up to 12MBits/sec) or
USB 2.0 (Data Transfer Rate = up to 480Mbits/sec) standard

This drive can read all types of CD and DVD media including CD, CD-R,
CD-RW and DVD disk, DVD-DL, DVD-R/DVD-RW, DVD+R/DVD+RW. As
well as write to CD-R, CD-RW and DVD recordable media.*

EZ Writer can be easily connected to computer via USB port, and can
even be disconnected and re-connected while the computer is running
(Plug-n-Play).

Bus Powered, No AC power adapter required.

LightScribe direct disc labeling (EZ-WTR-DVD-DL4-LS Only). LightScribe
is an innovative technology that uses a special disc drive, special media,
and label-making software to burn labels directly onto CDs and DVDs.
Because the labels are laser-etched—not printed—there’s no ink, no
smudging, and no peeling. Burn your data (music, photos, video, etc.)
in the EZ Writer drive. When your data burning is complete, open the
drive and flip the disc over. Then burn your LightScribe label. For more
information about LightScribe go to the What is LightScribe section of
this manual.
This user’s manual is intended to describe how to install EZ Writer on the
computer. To use the recording & playing software, please refer to the “On-
Line Help” provided by the software publishers.
* Only with DVD burner optical drive, NOTE: Depending on the DVD burner
included with you EZ Writer it may support either DVD-DL, DVD-R/DVD-RW,
or DVD+R/DVD+RW, or both formats. The optical drive capabilities included
with your EZ Writer will be clearly marked on the product packaging.