Value You Can Depend On
4. Take the top of the enclosure and line up the holes with the
AC Adapter and USB port on the circuit card and hard drive
assembly.
5. Place top onto the circuit card and hard drive assembly.
6. Now, carefully fl ip the total assembly so that the circuit card
assembly is showing.
Note: If you are performing an upgrade, you do not need to
complete steps 7 through 9 until you switch out your notebook
drive for your new hard drive. The EZ Upgrade 1.8T will then
become your backup system. Please proceed to the Cloning
section on page 7.
5
