Creating your first clone backup using Clone EZ
1. Once the EZ Gig II software is installed, consult the Clone EZ Manual, located
on the EZ Gig II CD, for detailed instructions on using Clone EZ. These
instructions are exclusive for creating a clone of your hard disk using the
Automatic Upgrade Feature.
2. Apricorn EZ Gig II will need to restart your computer. Please save all work
before starting Apricorn EZ Gig II.
3. To Start EZ Gig II, click on the EZ Gig II icon on the desktop or go to
Start�Programs�Apricorn�EZ Gig II, and select Apricorn EZ Gig II.
4. Select Automatic Upgrade from the main screen to open Clone EZ
5. At the first screen, select the source hard drive. (If the destination hard drive
is completely blank, Clone EZ will automatically configure the source and
destination hard drive. Skip to step 8). Click Next to continue.
6. Select the destination hard drive and click Next to continue.
7. If there is data on the destination drive, you must agree to delete the partitions
on it to continue. If you do not want to overwrite the data on the drive, click
Back and choose another drive. Click Next to continue.
8. Clone EZ presents a layout of the source and destination drive after the upgrade .
Review the layout and confirm the settings. To find out the model number of the
drive, move the mouse over the picture of the hard drive and keep it there for a
second. When satisfied, click Next to continue
9. This will open the Clone EZ Script window. Verify the operations listed in the
white box. If there are corrections to be made, click the Back button to change
the selected options. Until the Proceed button is clicked, the selected operations
will not execute.
If everything is correct, click Proceed to begin the clone.
10. Click Yes when prompted to reboot.
11. On reboot, after the Windows splash screen appears, Clone EZ will begin the
cloning process. The progress bar on the bottom of the screen will indicate the
progress.
6
�� ������
������ � �������� �������� ��������
���
