6. Thread both of the shoulder pads (06) onto the shoulder
straps (05). (fig. 58)
7. Thread the loops of both the shoulder straps (05) and the
shoulder pads (06) through the harness slots (37) The loop of
the shoulder pad should be beneath the loop of the shoulder
strap. (fig. 59)
Turn the car seat around so that the rear is facing you.
4. Bring the 2 latches of the buckle (44) into the buckle (19).
(fig. 56)
CAUTION: Ensure that the straps are not twisted at
any point.
5. Pull the adjusting ring (07) upwards, whilst pushing the
headrest (08) downwards to its lowest position. (fig. 57)
56
19
44
58
06
05
59
37
06
05
8. Unlatch the rear cover (32) by using the cover latch (31).
(fig. 60)
9. Fix the loops of the shoulder pads (35) on the headrest lever
(36). (fig. 61)
10. Remove the joint plate (33) from the recess (34) in the
cover. (fig. 62)
11. Place the webbing loops of the shoulder straps (42) over
the joint plate(33). (fig. 63)
CAUTION: Ensure that the straps are not twisted at any point.
12. Close the rear cover (32).
33 34
62
61
35
36
63
42
33
57
07
08
09
31
32
60
15
