14
3.3 System Information
You can display system settings information as shown on
Table 3.3 A
below at any time by pressing the
Display
button
. In the playback mode, the recorded video information is displayed. In the live or
recording mode, the Manual Recording information is displayed. Each sequential press of the
Display
button
displays a different message detailed in the following example. By default, the unit displays
time, date, and an indicating bar of capacity status on a monitor as shown next.
Default display
Press the
Display
button
once; the NVR will display the following sample message plus the default
display. Press the
Display
button
again; the unit will not display any OSD message. Press the
button one more time to back to the default display.
Table
3.3
A.
Description
of
Table
3.3
A
(CH):
Channel
(LANCAM IP):
LAN Camera IP address
(LIVE):
The LAN Camera activated
(OFF):
The LAN Camera inactivated
(19):
The channel current display speed rate, 19 images/sec
(
):
Disconnection
;
(
):
Alarm
;
(
):
login error
;
(
):
motion
; (
):
Audio
; (
):
Timer
(227K):
The LAN Camera bandwidth
(LANCAM IP : 192 . 168 . 001 . 205):
Setting of
the Ethernet
communication,192.168.001.205
(DHCP:OFF):
Only use manual setup IP address
(NTSC):
NTSC system
(
):
Indicate which HDD is activated
(HD):
Hard disk Compartment
(SIZE 20G):
The capacity of the installed hard disk
(POS):
Percentage of system;
R:
Recording;
P:
Playback
11 HR (HD1):
Per minute change showing the total recording
time.
(
X
):
Cannot operate at now
CH LANCAM IP
X
1 192.168.001.250 LIVE 19 227K
2 192.168.001.020 LIVE 19 221K
3 192.168.001.030
- - -
4 192.168.001.040 OFF
5 192.168.001.050 OFF
6 192.168.001.060 OFF
7 192.168.001.070 OFF
8 192.168.001.080 OFF
IP : 192.168.001.205 DHCP:OFF NTSC
HD SIZE POS
1 20 G
39.5% R 11 HR (HD1)
2 39 G
0.0% P
04-09-2003 12:48:19
CAM1 CAM2
CAM3 CAM4 CAM5 CAM6
CAM7 CAM8
04-09-2003 12:48:19
Содержание NVR-2018
Страница 2: ......
