EPSON ESC/POS COMMANDS
12
RTP-2262 Thermal Receipt Printer
1.
Lift both sides of the cover directly to open
the cover
2.
Remove the used paper roll core.
3.
Place the new paper roll into the
compartment. Take note of the correct
paper direction.
4.
Pull out a small portion of the paper then
close the compartment cover.
3.3 Printer Status Report
The printer can generate a status report to show the current system configuration.
The report includes the following:
Supported paper width
Printing speed
RS-232 configuration such as Baud rate, parity check, data bits, and flow
control scheme
Supported emulation language
Print density
Receive error handling method
Printing the Status Report
Before printing the status report, make sure that the printer is turned off and the
cover is closed.
To print the status report, press and hold the
FEED
button and turn on the printer.
The printer prints the current status. After printing, the printer goes to standby mode.
