Appostar KP-5370, Руководство пользователя

Страница: 44 / 63

BIOS SETUP
40 KP-5370 Touch POS Terminal
IDE Mode: When set to IDE, the SATA controller disables its RAID and AHCI
functions and runs in the IDE emulation mode. This is not allowed to access
RAID setup utility.
RAID Mode: When set to RAID, the SATA controllerenables both its RAID and
AHCI functions. You will be allows access the RAID setup utility at boot time.
ACHI Mode: When set to AHCI,the SATA controller enables its AHCI
functionality. Then the RAID function is disabled and cannot be access the
RAID setup utility at boot time.
Options available: IDE/RAID/ACHI. Default setting is IDE Mode.

Type
Auto: Set parameters automatically. (Default setting)
CD-ROM: Use for ATAPI CD-ROM drives or double click [Auto] to set all HDD
parameters
automatically.
ARMD: Use ARMD drive is installed here.
BIOS Setup - 34 -

LBA/Large Mode
Configure the device type in the specific IDE channel support LBA Mode.
Option available: Auto/Disabled. Default setting is Auto.

Block (Multi-Sector Transfer)
Configure the information of Multi-Sector Transfer Mode.
Auto: The data transfer from and to the device occurs multiple sectors at a
time if the device
supports it.
Disabled: The data transfer from and to the device occurs one sector at a
time.
Option available: Auto/Disabled. Default setting is Auto.

PIO Mode
This feature allows you to set the PIO (Programmed Input/Output) mode for
the two IDE devices (Master
and Slave drives) attached to that particular IDE channel.
Option available: Auto/Disabled. Default setting is Auto.

DMA Mode
Configure the DMA mode of the device in the specific IDE channel.
Option available: Auto/Disabled. Default setting is Auto.

S.M.A.R.T Mode
This feature allows you to set the PIO (Programmed Input/Output) mode for
the two IDE devices (Master
and Slave drives) attached to that particular IDE channel.