Apposite Netropy 100G, Руководство по оборудованию

Страница: 8 / 21

4 C
APACITY
L
IMITATIONS
7
4
C
APACITY
L
IMITATIONS
The Netropy 100G can forward 100 Gbps of packets in each direction across both emulation
interfaces at full line rate for all packet sizes.
The maximum one-way latency that the Netropy 100G supports depends on data throughput
and packet size. The chart below summarizes a few typical examples for traffic in one direction
on one engine. To calculate the maximum latency in each direction for traffic in both directions
at the listed rate, or to calculate the maximum latency in one direction on two separate engines
at the same rate, divide these maximum one-way latencies values in half. The listed values are
based on actual data throughput, not path bandwidth settings. Users who need to emulate
latencies close to these limits are advised to contact Apposite to discuss their specific
requirements. Maximum latencies of over 20 seconds are not specifically listed but are not
limited to 20 seconds and may be much larger than 20 seconds.
The maximum emulation ba ndwidth may be limited below the hardware capacity by the device’s
license key. See the Netropy User’s Guide for more details on the license key.
Frame Size
Aggregate
Throughput
64 bytes 500 bytes 1518 bytes 9220 bytes
100 Mbps >20 sec >20 sec >20 sec >20 sec
1 Gbps 15 sec >20 sec >20 sec >20 sec
10 Gbps 1.6 sec 9.8 sec >20 sec 15.8 sec
20 Gbps 800 ms 4.9 sec 14.6 sec 7.9 sec
40 Gbps 400 ms 2.4 sec 7.3 sec 3.9 sec
80 Gbps 200 ms 1.2 sec 3.6 sec 1.9 sec
100 Gbps 160 ms 990 ms 2.9 sec 1.5 sec
200 Gbps 80 ms 490 ms 1.4 sec 790 ms
Table 1: Maximum Round-Trip Latency