Apposite Netropy 100G, Руководство по оборудованию

Страница: 14 / 21

8 C
ONSOLE
I
NTERFACE
13
8
C
ONSOLE
I
NTERFACE
Console access to the Netropy 100G is through the RJ45 interface on the front panel labeled
“
CONSOLE
. ” An RJ45 to DB9 cable is included with the unit to connect the device to a standard
PC serial port. The pin-out for the RJ45 interface is shown below:
To connect to the console, use a terminal or a computer running terminal emulator software
such as HyperTerminal or PuTTY, and set the following parameters:
9600 baud
8 data bits
No parity
1 stop bit
Disable flow control
Pin Definition Pin Definition
1 CTS/RTS 2 DTR
3 TxD 4 GND
5 GND 6 RxD
7 DSR 8 CTS/RTS