Applied Wireless SF900, Руководство пользователя

Страница: 11 / 16

Application Circuit-Loopback Mode
Loopback Mode
In loopback mode, the relay is activated as in the earlier example. However, in Loopback
mode, a transmission will then be sent back to the originating location and a relay
activated as feedback that the remote instruction has been carried out.
These switches (or
other low voltage
signals up to 36 Volts)
controls these lights (or
other low voltage loads
up to 10 Amps.
The status of these
lights (or other low
Voltage loads up to 36
Volts) control these
lights (or other low
voltage loads up to 10
Amps.
These switches
have no effect.
There can be a mix of loopback modes, however only
one side of each channel can be enabled and the
corresponding input on that side is disabled.
AC or DC Power
Supply or Adapter
as required.
AC or DC Power
Supply or Adapter
as required.