Applico GPP52L, Руководство пользователя

Страница: 15 / 25

12
Installation
IMPORTANT: Before installation read all the instructions and make sure that the
voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same
as the voltage and frequency in your home. The rating plate can be found behind the
grease filters.
The manufacturer & supplier declines all responsibility in the event of the installer
failing to observe all the accident prevention regulations in force, which are
necessary for normal use and the regular operation of the electric system.
Electrical connection

Your rangehood is intended for fitting with power cord & plug for connection
to 10A power outlet.

The power cable must be connected to the terminals marked L (live) and N
(neutral) in the rangehood and fixed with a cable clamp.

The rangehood’s power cable must be fitted upstream from the electrical
connection using an omni-polar switch with a contact distance of at least 3mm.
WARNING:THIS APPLIANCE MUST BE EARTHED!
We recommend that the appliance is connected by a qualified electrician, who is
registered with the Electrical Workers Registration Board (EWRB) and who will
comply with ALL regulations. The wires in the mains lead are coloured in accordance
with the following NZ code:
Blue = Neutral, Brown = Live, Green/Yellow = Ground
If you only can find two wires in the cable (blue and brown), neither must be
connected to the Earth terminal.
As the colours of the wires in the appliance’s mains lead may not correspond with
the coloured markings identifying the terminals in your spur box, please proceed as
follows:

The blue wire must be connected to the terminal marked “N” (neutral), or
coloured black.