o
IMPORTANT: There are ventilation holes
around the outside of the hob. YOU MUST
ensure that these holes are not blocked by
the work top, when you put the hob into
position (see drawing opposite).
o
Carefully turn the hob upside down and place it on
a cushioned mat.
o
IMPORTANT: Do not use a silicon sealant to seal
the appliance against the aperture. This will make
it difficult to remove the hob from the aperture in
future, particularly if it
needs to be serviced.
o
Carefully turn the hob back over and then gently lower it into the
aperture hole that you have cut out.
o
There are holes on the base or the sides of the hob that you can fix
the four brackets to. There are three holes in each one of the
brackets.
o
You should place the bracket
on the underneath of the hob,
in
a
position
that
is
appropriate for the aperture
that you have cut out. Using
the screws provided, fix the
bracket to the hob. These
screws MUST be securely
tightened.
22
