MNAPPR11072005V1.0
Page 6
Before you install Presenter
Before you install Presenter
Before you install Presenter
Before you install Presenter
Before you install Presenter
There are several steps you should take in preparation for the installation of
your Presenter unit. These steps are to ensure proper installation so that your
product may run smoothly and trouble free.
We have attempted to make the installation procedure as simple as possible.
Variations in computer systems might make your installation procedure unique
but please try to follow these steps as closely as possible.
Please check the following:
•
Make sure to logon with a username and password that has Administrator
privileges.
•
Install and register Windows XP and all normal applications that you will
run on this PC.
•
Make sure that you have installed current drivers for your normal video
adapter.
•
If your PC supports Hyperthreading (HT), make sure that it is disabled in the
BIOS/CMOS.
•
Make sure that any Remote Control Host software is uninstalled.
•
Verify that Windows XP Service Pack 1 (SP1 or SP1a) is installed. (Start >
Control Panel > System > General. Or Windows Key+Pause/BreakKey).
•
Make sure that you have at least 256MB of Ram.
•
It might later be useful to determine wether your computer uses an AGP or
PCI Graphics Card. You may write it down or remember it.
•
Disable any screen savers. Go to Control Panel > Display > Screen Saver Tab
and select (None) for the screen saver. Here you will also want to adjust
the Power settings by clicking the Power button at the bottom of the
Screen Saver tab. You will want to select the Always On power scheme and
“Turn Off Monitor” should be set to “Never”.
•
Make sure that any AntiVirus software is disabled as this may interrupt or
interfere with installation. Note: You may reenable this software after
Presenter is installed.
After any settings might have been made it might be neccessary to restart your
computer. If you have not done so already please do so no to ensure that all
changes have been finalized.
Installation and Operation
Installation and Operation
Installation and Operation
Installation and Operation
Installation and Operation
