Applent Instruments AT4202 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 35

Applent Instruments AT4202 Скачать руководство пользователя страница 3

3

Installation and Setup Wizard

CERTIFIACTION, LIMITED & LIMITATION OF LIABILITY

Applent Instruments, Inc.

ͧ

shortened form

Applent

ͨ

certifies that this product met its published

specifications at the time of shipment from the factory. Applent further certifies that its calibration

measurements are traceable to the People’s Republic of China Nat

ional Institute of Standards and

Technology, to the extent allowed by the Institution’s calibration facility or by the calibration

facilities of other International Standards Organization members.

This Applent instrument product is warranted against defects in material and workmanship for a
period corresponding to the individual warranty periods of its component products.

The warranty

period is 1 year and begins on the date of shipment.

During the warranty period, Applent will, at

its option, either repair or replace products that prove to be defective. This warranty extends only to
the original buyer or end-user customer of a Applent authorized reseller, and does not apply to fuses,

disposable batteries or to any product which, in Applent’s opinion, has be

en misused, altered,

neglected or damaged by accident or abnormal conditions of operation or handling.

For  warranty  service  or  repair,  this  product  must  be  returned  to  a  service  facility  designated  by
Applent. The buyer  shall prepay  shipping charges to Applent and the Buyer  shall pay all shipping
charges, duties, and taxes for products returned to Applent from another country.

Applent warrants that its software and firmware designated by Applent for use with an instrument
will execute its programming instruction when properly installed on that instrument. Applent does
not warrant that the operation of the instrument, or software, or firmware,  will be uninterrupted or
error free.

The  foregoing  warranty  shall  not  apply  to  defects  resulting  from  improper  or  inadequate
maintenance  by  the  Buyer,  Buyer-supplied  software  or  interfacing,  unauthorized  modification  or
misuse,  operation  outside  the  environmental  specifications  for  the  product,  or  improper  site
preparation or maintenance.

THIS WARRANTY IS BUYER’S

SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. APPLENT SHALL NOT BE LIABLE FOR
ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS
OF DATA, WHETHER ARISING FROM BREACH OF WARRANTY OR BASED ON CONTRACT, TORT,
RELIANCE OR ANY OTHER THEORY.

People’s Republic of China

Jiangsu Province

Changzhou Applent Instruments Inc.

Oct. 2009

Rev.A1

«
1
2
3
4
5
...
»

Содержание AT4202




































Отзывы:

Нет отзывов