Applent Instruments AT2811 Скачать руководство пользователя страница 3

 

CERTIFIACTION, LIMITED & LIMITATION OF UABILITY

CERTIFIACTION, LIMITED & LIMITATION OF UABILITY 

Applent Instruments, Inc. 

(shortened form 

Applent) 

certifies that this product met its published specifications 

at the time of shipment from the factory. Applent further certifies that its calibration measurements are traceable 
to the People’s Republic of China National Institute of Standards and Technology, to the extent allowed by the 
Institution’s calibration facility or by the calibration facilities of other International Standards Organization 
members. 
 
This Applent instrument product is warranted against defects in material and workmanship for a period 
corresponding to the individual warranty periods of its component products. 

The warranty period is 1 years 

and begins on the date of shipment.

 During the warranty period, Applent will, at its option, either repair or 

replace products that prove to be defective. This warranty extends only to the original buyer or end-user 
customer of a Applent authorized reseller, and does not apply to fuses, disposable batteries or to any product 
which, in Applent’s opinion, has been misused, altered, neglected or damaged by accident or abnormal 
conditions of operation or handling.   
 
For warranty service or repair, this product must be returned to a service facility designated by Applent. The 
buyer shall prepay shipping charges to Applent and Applent shall pay shipping charges to return the product to 
the Buyer. However, the Buyer shall pay all shipping charges, duties, and taxes for products returned to Applent 
from another country.   
 
Applent warrants that its software and firmware designated by Applent for use with an instrument will execute its 
programming instruction when properly installed on that instrument. Applent does not warrant that the operation 
of the instrument, or software, or firmware, will be uninterrupted or error free. 
 
The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance by the 
Buyer, Buyer-supplied software or interfacing, unauthorized modification or misuse, operation outside the 
environmental specifications for the product, or improper site preparation or maintenance. 
 
THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER 
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. APPLENT SHALL NOT BE LIABLE FOR 
ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS 
OF DATA, WHETHER ARISING FROM BREACH OF WARRANTY OR BASED ON CONTRACT, TORT, 
RELIANCE OR ANY OTHER THEORY. 
 
 

Applent Instruments, Inc. 

Changzhou, 

Jiangsu, 

The People’s Republic of China. 

Rev.C0 May, 2014 

 

 
 
 
 
 

Содержание AT2811



















Отзывы: