Step on the Scale
bare foot and
keep contact with
electrodes
(stainless
surfaces).
BATTERY INSTALLATION
1.
Remove the battery cover located on the bottom of the body scale. Insert 3 pieces of AAA batteries
in the compartment with correct polarity indicated on the scale.
2.
After inserting the batteries, the LCD will show full display for about 2 seconds
3.
Then the LCD will show 0.0 value and it is now ready for use
WEIGHT AND BODY FAT MEASUREMENT
Step on the Scale bare foot and keep contact with electrodes (stainless surfaces). The weight will be
displayed on LCD. Once the reading is steady, the display will flash 3 times to indicate the measurement
is completed.
To make a new measurement, just come down from the scale and step on it again.
Put your feet properly on the scale as follow:
Notes:
1. To obtain accurate measurement, make sure your feet are on the stainless steel plates and that you
are standing straight and still.
2. The body scale should not be placed on any uneven or carpeted flooring so that your body weight is
balanced on both feet
3. To ensure accuracy, we suggest you use the scale at the same time every night (19:00 - 21:00)
4. The Scale is equipped with auto-power off function. Once you finished the measurement, it will turn
off in about 15 seconds.
Do not cover
the LCD
Display
Make sure that
both feet are inside
the scales & in
contact with the
electrodes
(stainless surface)
