![Appareo Stratus Power Скачать руководство пользователя страница 6](http://html.mh-extra.com/html/appareo/stratus-power/stratus-power_installation-instructions-manual_2954823006.webp)
600840-000041 Stratus Power Installation Instructions
Rev. 1.0
Last Revised: December 15, 2016
Page 6 of 12
Output Voltage Range
5.0 VDC +/- 0.25 V
Max Current Output
2.5 A per port
Power Output
25 W
*includes mating connector, excludes bend radius
Table 3: Equipment specifications
1.6.
Required tools
The following tools are needed for installation of Stratus Power.
Tool
Part Number
Used For
1 ¼ inch drill bit
--
Drilling hole in instrument panel
Multimeter
--
Measuring output power and polarity
Crimp tool
0640160201
Power connectors
Table 4: Required tools
1.7.
Supplied hardware
Item
Appareo Part Number
Quantity
Stratus Power Assembly
153510-000040
1
Stratus Power Panel Cover
353070-000074
1
Screw
356060-000100
2
Power Connector Receptacle
251015-000115
1
Connector Terminals
251015-000116
2
Table 5: Supplied hardware
1.8.
Unpacking/inspection requirements
When unpacking Stratus Power, visually inspect for any damage to the unit or missing
components. If damage or missing parts are present, contact Appareo.
1.9.
Limitations for installation
This article meets the minimum performance and quality control standards required by a
technical standard order (TSO). If you are installing this article on or in a specific type or class of
aircraft, you must obtain separate approval for installation.
1.10.
Circuit protective device marking
Ensure that the circuit protective device marking is in accordance with AC 43.13-2B, Chapter 2,
Section 207, Sub-Section f., Paragraph (1).