![Appareo Stratus ES Скачать руководство пользователя страница 34](http://html.mh-extra.com/html/appareo/stratus-es/stratus-es_installation-instructions-manual_2954815034.webp)
600840-000031 Stratus ES/ESG Installation Instructions
Rev. 2.2
Last Revised: February 20, 2018
Page 34 of 45
Navigation
(i)
VOR / ILS
Verify the operation of each VHF nav receiver in both VOR and ILS modes (including glide
slope) while monitoring the effects of Stratus ES/ESG. Record the frequencies tested.
108.000 MHZ
108.100 MHZ
(ii) DME
Verify the operation of each DME while monitoring the effects of Stratus ES/ESG. The same
frequencies used for VOR and ILS testing may be used for this test.
(iii) Marker Beacon
Verify the operation of each Marker Beacon Receiver while monitoring the effects of
Stratus ES/ESG. The same frequencies used for the ILS test above may be used.
(iv)
ADF
Verify the operation of each ADF receiver while monitoring the effects of Stratus ES/ESG.
Frequencies from each band should be tested when possible. Public broadcast stations are
acceptable for conducting test.
Flight management systems
(i) FMS
Enter a flight plan into each FMS and verify the display of the track and navigation information
while monitoring the effects of Stratus ES/ESG.
(ii) GPS
Monitor GPS signals for each GPS receiver and verify stability of the signals while monitoring
the effects of Stratus ES/ESG.
Record GPS position coordinates for the aircraft.
(iii) Auto pilot
Verify the function of auto pilot while monitoring the effects of Stratus ES/ESG.
Safety equipment
(i) EGPWS / TAWS
Verify the function of the EGPWS and Terrain Display (if equipped) while monitoring the effects
of Stratus ES/ESG.