17
3-2 Voltage Measurements
1. Connect the red test lead to the “V
Ω
Hz” input
terminal and other (black) test lead to the “COM” terminal.
1. Set the rotary function to the required position.
2. Set the DC/AC switch to the required position.
3. Connect black test lead to "COM" terminal and red test lead to the "V
Ω
Hz" input terminal.
4. Connect test leads to measuring points and read the displayed value.
5. "Warning : Do not exceed 600V rms limits stated in the specification".
WARNING :
TO AVOID ELECTRIC SHOCK HAZARD, OR DAMAGE TO THE METER, DO NOT ATTEMPT
TO MEASURE VOLTAGES THAT MIGHT EXCEED 600 V rms. DO NOT APPLY MORE THAN
600V rms BETWEEN THE COMMON INPUT TERMINAL AND EARTH GROUND.
