506/506B
EN
Memory Save / Load
When measuring, you can save the reading to memory and
load it from memory. The meter can store maximum 1000
data in memory. The recorded data amount shows on the
secondary display.
To use memory save / load mode, move the blink cursor
of menu to MEM position, and press the ENTER button
to enter mode. In this mode, you can operate the below
options:
To exit memory save / load mode, press the CANCEL
button.
Memory Options
A-SAVE
SAVE
CLR
MAX
MIN
LOAD
You can operate the Auto-Save mode to automati-cally save
new reading. When you use the probes to measure a new
reading, the meter will automati-cally save it. In some case,
the Auto-Save mode will not work. For example, the reading
is smaller than the limit (refer Auto-Hold), or the reading is
OL. Press ENTER button to start Auto-Save mode, press
CANCEL button to exit.
You can press the ENTER button to review data from
memory. Press UP or DOWN button to select data. Press the
CANCEL button to return.
Press ENTER button to save a new reading to memory.
Press ENTER button to clear all data from memory.
Press ENTER button to review the maximum data from
memory.
Press ENTER button to review the minimum data from
memory.
17
