9
3.1.2 Print Setting
Each type of filament needs different setting for best print effect.
If using prepared models of Apollo3D, setting completed automatically under the circumstance of
choosing correct extruder and filament.
For better adhesiveness of print product, we suggest applying a thin layer of glue before printing.
Adaptability of filament parameters: Different filament brands have different filament characteristics.
When using Saturn, it is recommended to use expert mode to find a suitable parameter to ensure better
printing quality.
Thickening and increase flow rate of the first layer are beneficial to the adhesion.
When printing small models (or environment temp is higher than 25 degree) with PLA: suggest to
set platform temperature to 45 degrees.
When printing big models (or environment temp is lower than 10 degree) with PLA: suggest to set
platform temperature to 60 degrees.
3.2 Print Start-up
(1) Saturn10:
Please complete the leveling, loading correctly with the guidance of User Guide at first print.
Print from SD Card
Tap [Print from SD], choose printed files saved in internal SD Card already.
(2) Saturn10P:
Please complete the leveling, loading correctly with the guidance of User Guide at first print.
Print from SD Card
Tap[Tools]- SD Card icon on the touch screen, choose printed files saved in internal SD Card already.
Print from USB stick
Tap[Tools]-USB stick icon on the touch screen, choose printed files saved in USB stick already.
We provide you a Test model in our website to print right now.
3.3 Model Removal
Warning! Be careful of your body position when using manual tool to remove the model from build plate.
Sudden tool slippage and improper body position may cause injury.
Caution: Do not scratch build plate when removing the model. Scratches in build plate will cause
modeling errors.
Model cooling
Let build plate and model cool down themselves when printing without using glue stick, you can remove
model easily from build plate.
Use scraper
Remove model with a scraper when model still attached to the build plate after cooling. Keep the scraper
parallel to build plate, and insert it into model bottom, you can remove model successfully.
