4-12 CHAPTER 4
ROM PCI/ISA BIOS(2A5LDPAB)
INTEGRATED PERIPHERALS
WARD SOFTWARE, INC.
IDE HDD Block Mode:
The default value is Enabled.
Enabled
:
Enabled IDE HDD Block Mode. The HDD transfer rate is better than
Disable.
Disabled
:
Disable IDE HDD Block Mode.
PCI Slot IDE 2nd Channel:
The default value is Enabled.
Enabled
:
Enable secondary IDE port and BIOS will assign IRQ15 for this port.
Disabled
:
Disable secondary IDE port and IRQ15 is available for other device.
If you don't use the Onboard IDE connector, then use On-card
(PCI or ISA card) IDE connector. You have to set Onboard Primary
PCI IDE: Disabled and Onboard Secondary PCI IDE: Disabled
from CHIPSET FEATURES SETUP UTILITY.
The Onboard PCI IDE cable should be
equal to or less than
18 inches (45 cm.).
Onboard Primary PCI IDE:
The default value is Enabled.
Enabled
:
Enable Onboard 1st channel IDE port.
Disabled
:
Disable Onboard 1st channel IDE port. When use On-card (PCI or ISA
card) IDE connector.
Onboard Secondary PCI IDE:
The default value is Enabled.
Enabled
:
Enable Onboard 2nd channel IDE port.
Disabled
:
Disable Onboard 2nd channel IDE port When use On-card (PCI or ISA
card) IDE connector.
4-6 INTEGRATED PERIPHERALS
Note:
ESC : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : No Change (Shift) F2 : Color
F7 : Load Setup Defaults
Onboard Primary PCI IDE
: Enabled
Onboard Parallel Port
: 378/IRQ7
Onboard Secondary PCI IDE
: Enabled
Onboard Parallel Mode
: ECP / EPP
IDE Prefetch Mode
: Enabled
ECP Mode Use DMA
: 3
IDE HDD Block Mode
: Enabled
Parallel Port EPP Type
: EPP1.9
IDE primary Master PIO
: Auto
IDE Primary Slave PIO
: Auto
Onboard USB Controller
: Disabled
IDE Secondary Master PIO
: Auto
IDE Secondary Slave PIO
: Auto
IDE Primary Master UDMA
: Auto
IDE Primary Slave UDMA
: Auto
IDE Secondary Master UDMA
: Auto
IDE Secondary Slave UDMA
: Auto
PCI IDE Secondary Channel
: Enabled
Onboard FDC Controller
: Enabled
UART 2 Mode
: Standard
