background image

 

 AWARD BIOS   4-3

Note

:  The 

Security Option

 contians "

setup

" and "

system

". The "

setup

" indicates

that the password setting is for CMOS only while the "

system

" indicates the pass-

word setting is for both CMOS and system boot up.

CPU Internal Cache / External Cache:

  These two categories speed up memory

access. However, it depends on CPU/chipset design. The default value is Enabled.
If your CPU is without Internal Cache then this item "CPU Internal Cache" will not
be shown.

Enabled

:

 Enable cache.

Disable

 :

 Disable cache.

Virus Warning: 

This category flashes on the screen. During and after the system

boots up, any attempt to write to the boot sector or partition table of the hard disk
drive will halt the system and an error message will appear. You should then run an
anti-virus program to locate the virus. Keep in mind that this feature protects only the
boot sector, not the entire hard drive. Default value is Disabled.

Enabled

 :

 Activates automatically when the system boots up causing a warning

message to appear when any attempt to access the boot sector or
hard disk partition table.

Disabled

:

 No warning message to appear when any attempt to access the boot sector

or hard disk partition table.

ROM PCI/ISA BIOS(2A5LDPAB)

BIOS FEATURES SETUP

AWARD SOFTWARE, INC.

Esc : Quit                                                : Select Item

F1   : Help                             PU/PD/+/- : Modify

F5   : Old Values                     (Shift)F2 : Color

F7   : Load Setup Defaults

Figure 4-3  BIOS FEATURES SETUP

Virus Warning

:  Disabled

Video BIOS

Shadow

: Enabled

CPU Internal Cache

:  Enabled

C8000-CBFFF

Shadow

: Disabled

External Cache

:  Enabled

CC000-CFFFF

Shadow

: Disabled

Quick Power On Self Test

:  Enabled

D0000-D3FFF

Shadow

: Disabled

Boot Sequence

:  A, C

D4000-D7FFF       Shadow

: Disabled

Swap Floppy Drive

:  Disabled

D8000-DBFFF       Shadow

: Disabled

Boot Up Floppy Seek

:  Enabled

DC000-DFFFF       Shadow

: Disabled

Boot Up NumLock Status

:  On

Boot Up System Speed

:  High

Gate A20 Option

:  Fast

Typematic Rate Setting

:  Disabled

Typematic Rate (Chars/Sec)

:  6

Type matic Delay (Msec)                        :  250
Security Option

:  Setup

PCI/VGA Palette Snoop

:  Disabled

OS Select For DRAM > 64MB

:  Non-OS2

Содержание P55KTX












































Отзывы: