Apollo GX50, Руководство по установке

Страница: 13 / 74

Introduction
Apollo GX50/60/65 Installation Manual
5
•
an altitude encoder/converter
•
Fuel/Airdata Computer (e.g. Shadin Model ADC-200)
When the GX50/60/65 is installed for VFR, a placard stating “GPS Limited to VFR Use
Only” or an FAA approved equivalent statement must be placed next to the primary indicator.
IFR GPS N
AVIGATION
I
NSTALLATION
When installed for IFR operation, the GX50/60/65 requires connections to several external
indicators. The minimum connections for IFR operation are as follows.
•
an A-33 or A-34 GPS antenna
•
power input
•
an external non-numeric indicator, such as a CDI or HSI
•
external lamp annunciators including “MSG” and “PTK”
For TSO-C129a A1 (non-precision approach) operation the following connections are also
required (GX65 not included):
•
external lamp annunciators including “APPRCH” and “ACTIVE”
•
an “OBS/HLD” external annunciator (with switch)
•
altitude input from an altitude encoder/converter or air data computer
The GX50/60/65 can also be connected to other external devices such as:
•
an autopilot
•
a moving map display connected to an RS-232 serial output
•
an SL40 VHF Comm radio connected to an RS-232 serial output (For GX50 units)
•
Fuel/Airdata Computer (e.g. Shadin Model ADC-200)
C
OMM
T
RANSCEIVER
- GX60/65
For standalone installations, the comm requires connections to:
•
a standard comm antenna
•
a microphone (or microphones)
•
a speaker or headphone
•
power input
The microphone and speaker or headphones may be installed dedicated to the GX60/65
comm, or by connection to an audio panel.
The comm installation can also include optional connections:
•
external remote flip-flop button
D
ATABASE
U
PDATES
The GX50/60/65 utilizes a Flybrary database stored on a standard plug-in memory card for
easy updating and replacement. Simply plug in the new datacard to update your existing
database or change to a new database.
Contact the II Morrow factory for information on databases available for the GX50/60/65.