Apollo GX50, Руководство по установке

Страница: 12 / 74

Introduction
4 Apollo GX50/60/65 Installation Manual
•
Flight timer
•
Automatic or manual magnetic variation
•
Parallel track offset
•
Alerts for -
−
Loss of navigation data
−
Arrival at waypoint
−
Special use airspace
•
Full range (10VDC to 40VDC) input supply voltage
The VHF Comm features of the GX60/65 GPS/Comm include:
•
760 channels
•
Frequency range of 118.000 to 136.975 MHz
•
Active and standby frequency display
•
Transmit status indicator
•
Stuck mic time-out
•
Frequency monitor function - listen to Standby frequency while monitoring Active
frequency for any activity
•
Weather channels - tune in to National Weather Service channels
•
Built-in intercom function
•
Frequency memory and recall functions
−
from navigation data base
−
10 last used
−
10 user stored
•
Two microphone inputs
•
12 watt audio amplifier
•
Remote flip/flop input
S
YSTEM
C
ONFIGURATIONS
The GX50/60/65 can be installed in several configurations based upon individual
requirements. This includes VFR or IFR GPS navigation. This section defines the minimum
requirements.
VFR GPS N
AVIGATION
I
NSTALLATION
When installed for VFR operation, the GX50/60/65 requires only the following minimal
connections.
•
an A-33 or A-34 GPS antenna
•
power input
The GX50/60/65 can also be connected to other external devices such as:
•
an external non-numeric indicator, such as a CDI or HSI
•
external lamp annunciators including “MSG” and “PTK”
•
an “OBS/HLD” external annunciator (with switch)
•
an autopilot
•
a moving map display connected to an RS-232 serial output