Apollo AGB50MKA37RXF6 Скачать руководство пользователя страница 47

Страница: 47 / 82

9.4 Checking the front and rear brake linings

9.5 Changing the front and rear brake linings

Danger of accidents

Worn-out brake linings reduce the braking effect.

• Ensure that worn-out brake linings are replaced immediately.

(Your authorized Apollo workshop will be glad to help.)

• Check the brake linings for minimum thickness A.

Minimum thickness A

≥

1 mm (

≥

0.04 in)

If the minimum thickness is less than specified:

• Change the front brake linings. ( .47)

• Check the brake linings for damage and cracking.

If damage or cracking is visible:

• Change the front brake linings. ( .47)

• Remove cotter pins, pull out pin, and remove the brake li-

nings.

• Clean the brake caliper and brake caliper support.

• Check that leaf spring in the brake caliper and sliding plate

in the brake caliper support are seated correctly.

• Manually press the brake caliper toward the brake disc to

push back the brake pistons. Ensure that brake fluid does

not flow out of the brake fluid reservoir, if necessary extract

excess.

Make sure that you do not press the brake caliper

against the spokes when pushing back the brake

pistons.

Содержание AGB50MKA37RXF6


















































































Результаты поиска

Содержание AGB50MKA37RXF6

Отзывы:

Похожие инструкции для AGB50MKA37RXF6

Бренды по названию

Популярные бренды

Apollo AGB50MKA37RXF6, Руководство пользователя

Результаты поиска

Содержание AGB50MKA37RXF6

Отзывы:

Похожие инструкции для AGB50MKA37RXF6

Бренды по названию

Популярные бренды