51000-305
Wireless Carbon Monoxide Alarm
Installation Guide
Attention:
This manual should be read prior to use and retained for further
information.
GENERAL INFORMATION
The Wireless Carbon Monoxide Alarm is a 3V battery powered wireless
detector intended for use with a compatible wireless alarm system. The
detector consists of an electrochemical carbon monoxide sensor assembly
coupled to a wireless transmitter. The Wireless Carbon Monoxide Alarm
communicates with the control panel and can send alarm, tamper and
battery condition messages to the system’s receiver. Refer to the wireless
system’s instruction for the maximum number of transmitters that can be
supported.
IMPORTANT: This detector must be tested and maintained regularly
following NFPA 720 requirements.
This device is designed to protect individuals from the acute effects of
carbon monoxide exposure. It will not fully safeguard individuals with
specific medical conditions. If in doubt consult a medical practitioner.
WARNING
This product is intended for use in ordinary
indoor
residential areas. It is
not designed to measure compliance with Occupational Safety & Health
Administration (OSHA) commercial and industrial standards.
Contents of box:
•
Wireless Carbon Monoxide Alarm with base
•
Installation guide
•
Pack of screws and anchors
•
Labels as appropriate
•
1 CR123A Panasonic battery
!
