Misting™
a. You are now ready to begin.
You MobileMist™ motor unit is equipped with our new variable speed control.
When you turn the motor on it will start at high speed. To lower the speed of the motor and make the unit quieter,
simply rotate the knob clockwise to the desired speed. Be careful to always have your motor speed fast enough to
atomize the solution you are spraying evenly. We suggest starting with the speed ½ way and adjust higher or lower.
Solutions vary and may require slightly different speeds.
c. Open the Solution Flow Screw as described above.
d. Set the mist pattern you wish to use by adjusting the air cap to the desired position. Refer to Mist Pattern
Diagram
e. Direct the Mist Applicator™ to the area of the body that you want to start spraying.
f. Pull back on the trigger (#13) and move the Mist Applicator™ as noted in the diagram below. Do not wave the
Mist Applicator™ back and forth in front of your client by bending your wrist. Rather, keep your wrist straight and
move your entire arm. Movement should be steady, even and deliberate, keeping your distance the same at all
times.
PROPER MISTING TECHNIQUE
