Apollo Sprayers MAXI-MISER PBC7600-GTO, Инструкция по эксплуатации

Страница: 11 / 20

10
3. Remove the air distributor (#6) and clean if necessary.
4.
Remove the fan adjustment ring (#8) and air distributor plate (#7). The air distributor plate is attached to the ring. These
two pieces separate. Clean them both if necessary.
Note: Make sure you reassemble the two pieces correctly or you will only get a round fan pattern.
5.
Remove the fan adjustment seal (#9). Clean if necessary.
6.2.3 Re-Assemble the Spray Gun
1. Insert the fan adjustment seal (#9).
2. Insert the fan adjustment ring and air distributor plate. (#7 and #8). If you have
separated these two pieces it is critical that the white air distributor plate is correctly
re-inserted into the fan adjustment ring. Note that the open slots on the air distributor
plate must be visible through the holes of the fan adjustment ring at the 12 o’clock
and 6 o
’clock positions
.