Apogee SN-500-SS, Руководство по эксплуатации продукта

Страница: 2 / 32

Table of contents
1. Introduction 1
2. Precautions 1
3. Initial inspection 1
4. QuickStart 1
5. Overview 4
6. Specifications 6
7. Installation 6
7.1 Wiring to the data logger 6
7.2 Programming 7
7.2.1 CRBasic programming 7
7.3 Siting 8
7.4 Mounting 8
8. Operation 11
8.1 Sensor measurements 11
8.2 Long cables 12
9. Maintenance, calibration, and troubleshooting 13
9.1 Maintenance 13
9.2 Calibration 13
9.3 Troubleshooting 14
Appendix A. Importing Short Cut code into CRBasic Editor 15
Appendix B. SDI-12 sensor support 16
B.1 SDI-12 command basics 16
B.1.1 Acknowledge active command (a!) 17
B.1.2 Send identification command (al!) 17
B.1.3 Start verification command (aV!) 18
B.1.4 Address query command (?!) 18
B.1.5 Change address command (aAb!) 18
B.1.6 Start measurement commands (aM!) 19
Table of Contents - i