OPERATION AND MEASUREMENT
VERY IMPORTANT:
Apogee changed all wiring colors of our bare-lead sensors in March 2018. To ensure
proper connection to your data device, please note your serial number then use the appropriate wiring
configuration below.
Wiring for ST-100 Serial Numbers 2725 and above, ST-110 Serial Numbers 2725 and above, and ST-200 Serial
Numbers 1352 and above
Wiring for ST-100 Serial Numbers range 0-2724, ST-110 Serial Numbers range 0-2724, and ST-200 Serial Numbers
range 0-1351
Plug each wire into the appropriate data logger terminal following the illustrations below:
Blue: Analog Ground (negative thermistor lead)
Red: Excitation Channel (excitation for thermistor)
Black: Single-ended channel (positive thermistor lead)
Clear: Ground (shield wire)
White: Single-ended channel (positive thermistor lead)
Red: Excitation channel (excitation for thermistor)
Black: Ground (negative thermistor lead)
Clear: Shield/Ground