Aplus PlusIII-10KLRB, Руководство пользователя

Страница: 21 / 46

5.3 Turning On and Turning Off UPS
Attention: The UPS could only be turning on while connecting with the mainsat the first time.
Attention: Please switch off the connected loads first before turning on the UPS, and switch
on the loads one by one after the UPS is turned on. Switch off all of the connected loads before
turning off the UPS.
5.3.1 Turning on UPS with mains
1) Check all the connection is correct. Check the breaker of external battery pack is in
“ON” position.
2)
Set input breaker in“ON” position. At this time the fan begins to rotate, LCD will show
“WELCOME”. Then LCD will show the default UPS status summary screen after UPS
finishing self-test.
3) By pressing button continuously for more than 1 second, the buzzer will beep for
1s, UPS starts to turn on.
4) A few seconds later, the UPS turns into Line mode. If the mainspower is abnormal, the
UPS will transfer to Battery mode without output interruption of the UPS.
5.3.2 Turning on UPS without mains
1) Check allthe connection is correct. Check the
breaker of external battery pack is in “ON”
position.
2) By pressing button continuously for more than 100ms, the UPS would be powered
on. At this time the fan begins to rotate, LCD will show“WELCOME”. Then LCD will
show the default UPS status summary screen after UPSfinishing self-test.
3) By pressing button continuously for more than1s, the buzzer will beep for 1s, UPS
starts to turn on.
4) A few seconds later, the UPS turns into Battery mode. If the mainspower comes back,
the UPS will transfer to Line mode without output interruption of the UPS.