Integrated Circuits Inc.
aP23KWC28S USB Writer User Guide
Page 7 of 33
5/6/2016
16. Select required debounce time.
--- 65us or 16ms.
17. Select if using low voltage detect.
--- Select ON if the IC voltage less than 2V will be reset.
18. Select if using the oscillator.
--- XT (X’tal=16MHz ) / Rosc ext ( 68K ohm ) / Rosc Int.
19. Select the output function for output1, output2, output3.
--- Busy-H, Busy-L.
--- LED Flash (LED high active ) , ~LED Flash (LED low active ).
--- Stop-H, Stop-L.
--- Prog-BusyH, Prog-BusyL.
--- Load: For the play command [094h+D9~D0]; [D9~D0] total 10 bits indicate the voice address.
Same the aP89341 prefetch-071h [no gap loop play].
