4
To download application SW to the unit, use the microUSB cable, see Figure 3.
Figure 3.
Mechanical Installation
Select the place of installation from a safe, dry and mechanically protected area. Avoid installation to places
of direct sunlight and extreme temperature. Install the external GPS/GLONASS antenna so that it has the
best possible open sky view. Dimensions of the A11 are shown below.
Note!
Install the A11 unit as far away as possible
(minimum 1 metres recommended) from the car
radio and its antenna or other electrical devices to
avoid any interference.
Note!
If the ACC (Acceleration sensor) related
functions are used, make sure that mechanical
installation is proper. Otherwise ACC results are not
reliable.
Note!
To ensure the best ACC performance,
use
screws
to install the A11 unit.
Note!
If the unit is installed so, that the microSIM
card is facing down, please use the external micro
USB cover shield which locks the microSIM card.
Otherwise there is a risk that the microSIM card
loose its contact.
Figure 4. Dimensions of the A11
