5
Subject to change without notice | 83053600fUK – Translation of the original operating manual | ait-deutschland GmbH
Customer service
Addresses for purchasing accessories, for service
cases or for answers to questions about the unit and
this operating manual can be found on the internet at
any time and is kept up-to-date:
●
Germany: www.alpha-innotec.de
●
EU: www.alpha-innotec.com
Warranty / Guarantee
For warranty and guarantee conditions, please refer to
the purchase documents.
NOTICE
Please contact your dealer concerning war-
ranties and guarantees.
Disposal
When decommissioning the unit, always comply
with applicable laws, directives and standards for
the recovery, recycling and disposal of materials and
components.
“Dismantling”.
Heat metering
In addition to proof of the unit’s efficiency, the
EEWaermeG also requires heat metering (hereafter
referred to as HQR). Heat metering is mandatory for
air/water heat pumps. Heat metering for brine/water
and water/water heat pumps only have to be installed
for a flow temperature ≥ 35 °C. The heat metering must
record the total thermal energy released (heating and
domestic hot water) in the building. In heat pumps
with heat metering, the analysis is carried out by the
regulator. The regulator displays the thermal energy
discharged in the heating system in kWh.
Operation
Your decision to purchase a heat pump or a heat
pump system is a long-term contribution to protecting
the environment through low emissions and reduced
primary energy use.
You can operate and control the heat pump system
with the control element of the heating and heat pump
regulator.
NOTICE
Make sure that the control settings are cor-
rect.
Operating manual of the heating and heat
pump regulator.
To ensure that your heat pump or heat pump system
operates efficiently and ecologically, the following are
especially important:
€
ENERGY SAVING TIP
Avoid unnecessarily high flow temperatures.
A lower flow temperature on the hot water
side increases the efficiency of the system.
€
ENERGY SAVING TIP
Preferably use rapid ventilation. To save en-
ergy and reduce your heating costs, do not
leave windows open for long periods.
Care of the unit
The outer surfaces of the unit can be cleaned with a
damp cloth and household cleaning products.
Do not use cleaning or care products that contain
abrasives, acids and/or chlorine. Such products would
destroy the surfaces and could also damage the
technical components of the unit.