API Legacy AXS Скачать руководство пользователя страница 67

Страница: 67 / 103

L e g a c y A X S

A P I

Solo Modes and Controls

Solo Modes

The Legacy AXS provides five solo modes:

After-Fader Listen (AFL)

Pre-Fader Listen (PFL)

Pre-Fader Listen 2(PFL 2)

Solo-In-Place (SIP)

Mix-Over-Solo

After-Fader Listen (AFL) is the default Solo mode (no buttons engaged).

Solo modes are selected using the SOLO controls in the Master Section. The selected solo mode is

activated when a channel or Stereo Return SOLO button is engaged.

After-Fader Listen (AFL):

The stereo Solo Bus is fed post pan-pot (stereo)

Non-destructive

Control room monitor source is replaced with the Solo Bus

Solo level control

Pre-Fader Listen (PFL):

The stereo Solo Bus is fed post-insert pre-fader (mono)

Non-destructive

Control room monitor source is replaced with the Solo Bus

Solo level control

Pre-Fader Listen 2 (PFL 2):

The stereo Solo Bus is fed post-preamp/COMP and pre-EQ (mono)

PFL 2 allows monitoring of the Direct Output PRE signal

Non-destructive

Control room monitor source is replaced with the Solo Bus

Solo level control

Solo-In-Place (SIP):

Destructive (all other channels/returns will mute when a SOLO button is engaged)

Monitored via the assigned Program Buses

Post-fader and pan-pot (stereo)

Solo-In-Place for the Large Fader and Small Fader may be assigned individually

Solo-In-Place for Large Fader and Small Fader may operate independently or be linked

Mix-Over-Solo:

•

Mixes the Solo Bus with the active control room monitor source in the control room monitors

•

Level control adjusts the balance between the Solo Bus and the control room monitor source

AFL and PFL Solo modes only (does not work with Solo-In-Place)

A channel or return SOLO button must be engaged to activate Mix-Over-Solo

Auxiliary Master Solos

The output of the 265 Auxiliary Masters can be soloed by engaging the AFL button on the master.

After-Fader Listen is the only solo mode available to the Aux Masters.

Содержание Legacy AXS








































































































Результаты поиска

Содержание Legacy AXS

Отзывы:

Бренды по названию

Популярные бренды

API Legacy AXS, Руководство оператора

Результаты поиска

Содержание Legacy AXS

Отзывы:

Бренды по названию

Популярные бренды