API Legacy AXS Скачать руководство пользователя страница 23

Страница: 23 / 103

L e g a c y A X S

A P I

situation regardless of program level. Once the Threshold level is set, the Attack time can be selected

to react faster than 100uS or slightly slower than 25mS to reduce false triggering. Although the Depth

control has a full range of -80dB, the scale is expanded in the first half of rotation so 0 to 9dB is

available for fine-tuning of subtle, undetectable gating. The second half of rotation is from 10 to 80dB

for more drastic noise reduction.

The Expander function uses a 1:2 ratio, allowing the signal to "sneak up" to the full signal level without

any loss of "under threshold" vocal or percussion nuances. Setting the threshold in the Gate function

to the desired level, then switching to the Expander mode is the perfect setup.

For special gating functions such as the famed "gated snare reverb", the Release function can be

switched to Hold, and the Release control becomes the Hold time. In both scenarios, the unselected

function has a set time of 100mS.

The 235 makes use of the 2510 and 2520 op-amps and therefore exhibits the reliability, long life, and

uniformity which are characteristic of all API products.

The controls for the 235 Noise Gate/Expander function as follows:

IN (in/out switch): Activates the module

•

Illuminates when engaged

THRESH (Threshold): Sets the activation threshold

•

Variable from +25 to -45dB.

DEPTH: Sets the amount of attenuation (gain reduction) from 0 to -80dB. Although the Depth control

has a full range of -80dB, the scale is expanded in the first half of rotation so 0 to 9 dB is available for

fine-tuning of subtle, undetectable gating. The second half of rotation is from 10 to 80dB for more

drastic noise reduction.

AT (Attack): Selects attack time. Once the Threshold level is set, the Attack time can be selected to

react faster than 100 micro seconds or slightly slower than 25 milliseconds to reduce false triggering.

F: Fast (less than 100 microseconds)

M: Medium (25ms)

R/H (Release/Hold) Time: Sets release or hold time

50ms to 3 seconds

The Release or Hold function is determined by the HLD/REL switch

HLD/REL (Hold/Release): The Release function can be switched to Hold, and the Release control

becomes the Hold time. In both functions, the unselected one has a set time of 100ms.

HLD (Hold): The R/H control determines Hold time (Release is set to 100ms)

REL (Release): The R/H control determines Release time (Hold is set to 100ms)

EXP/GTE (Expander/Gate): Selects the Expander or Gate function

EXP (Expander): Sets the ratio to 1:2

GTE (Gate): Sets the gate function

-dB (Gain-reduction Meter): LED meter indicates the amount of gain reduction

Содержание Legacy AXS








































































































Результаты поиска

Содержание Legacy AXS

Отзывы:

Бренды по названию

Популярные бренды

API Legacy AXS, Руководство оператора

Результаты поиска

Содержание Legacy AXS

Отзывы:

Бренды по названию

Популярные бренды