The GlucoSure Autocode Blood Glucose Test Strip
The GlucoSure Autocode Test Strips are glucose specific, biosensor-based test strips that
can test glucose in capillary whole blood in as quickly as 6 seconds and requires very little
blood sample. The test result is plasma referenced for easy comparison to lab results and
has under-fill detection to alert you when there is not enough blood to perform a test, so
you can be assure that each reading you get is an accurate and meaningful result.
IMPORTANT:
• Be sure to use only the GlucoSure Autocode Test Strip with the GlucoSure Autocode
Blood Glucose Meter. Other brands of test strips will not work with the meter.
• The GlucoSure Autocode Blood Glucose Test Strips are sensitive to moisture and light
, it is important to close the vial cap of the test strip bottle tightly after each use. DO
NOT leave any test strips outside the bottle while not in use.
• Carefully discard used test strips and lancets in proper waste containers.
• Do Not reuse test strip
. Test strip are for single use only.
Blo
od
G
luc
os
e
M
on
ito
rin
g
Sy
ste
m
10
S
Saam
mp
plliin
ng
g E
En
nd
d
Apply blood or control
solution here
C
Co
on
nttaacctt P
Po
oiin
nttss
Insert this end to the test
strip port on the meter
GS Autocode-1A manual CE -711 BK:white 2011/10/12 1:44 PM Page 10