10) Slide the Inclinometer Pod with umbilical (UINC-3D-##) over the open end, opposite the pitot
clamp, of the extension (32PTXT32S).
11) Secure the assembly to the extension by turning the wing nuts
12) Screw the two Bored Brass Bushings (32M/32B-B) into the ends of the Universal Probe
Extension (PF-346XT32S).
13) Mount to the stack flange using the universal 3, 4 or 6 inch pattern mounting holes.
14) Slide the probe into the Universal Probe Extension (PF-346XT32S)
15) Connect the Umbilical/Pod Assembly (UINC-3D-##) to the XC-3D55 Console by connecting the
male quick connects to the female quick connects (P1 to P1, P2 to P2, P3 to P3, P4 to P4,P5 to P5).
16) Insert the male thermocouple plug into the female receptacle. Screw the amphenol (circular
connector) from the umbilical onto the inclinometer enclosure.
17) Insert the IEC end of the power cord into the mating receptacle on the front of the meter console.
18) Plug the male end into the appropriate power supply, 120VAC standard or 240VAC.
19) Switch the main power on from the front panel of the console.
10
11
12 13
14
15
16
17-19
17-19
Revision:01 Page 12 of 23 9/26/2017
