Apex Digital PWDC-5, Руководство по эксплуатации

Страница: 5 / 22

5
WARNINGS
Please note: You can be seriously injured working on or around machinery. Only do service work
for which you have the knowledge and proper equipment. If you have any doubt about your ability
to perform a service job, please call our toll free line at 877-754-7266 or 855-500-7239 or contact
an authorized dealer to schedule a qualified technician.
1. Read and understand the entire owner’s manual before attempting assembly or operation.
2. Read and understand the warnings posted on the machine and in this manual. Failure to
comply with all of these warnings may cause serious injury.
3. Replace the warning labels if they become obscured or removed.
4. This collector is designed and intended for use by properly trained and experienced
personnel only. If you are not familiar with the proper and safe operation of this collector,
do not use until proper training and knowledge have been obtained.
5. Do not use this collector for anything other than its intended use. If used for other purposes.
Apex Machine Group disclaims any real or implied warranty and holds itself unaccountable
from any injury that may result from that use.
6. Always wear approved safety glasses/face shields while around collector. Everyday
eyeglasses only have impact resistant lenses; they are not safety glasses.
7. Before operating this collector, or while cleaning it be sure to wear proper gloves and
clothing.
8. Wear ear protectors (plugs or muffs) during extended periods of operation.
9. Some dust created by power sanding, and other construction activities, contain chemicals
known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
•
Lead from lead based paint.
•
Crystalline silica from bricks, cement and other masonry products.
•
Arsenic and chromium from Chemically treated lumber.
Your risk of exposure varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area and work with approved safety
equipment, such as face or dust masks that are specifically designed to filter out microscopic
particles.
10. Make certain control switch is OFF before connecting the machine to the power supply.
11. Make certain the machine is properly grounded.