5. Quick Start for Digital
Camera Use
Battery Installation
Open the Battery Compartment and insert
four AAA batteries, paying attention to insert
them in the correct direction.(Polarity)
See Fig. (5)
Close the Compartment. Press Power (see
pg.10)
A battery life icon is located on the top left
corner of the status LCD. If Camera does
not power up, reinstall batteries once again.
The batteries are at full charge
The batteries are at half-full charge
The batteries are near empty that
need to be replaced
Important:
When the batteries are low, you
will see the battery symbol on the Status LCD
continuously blinking.
Always download
photos to the PC prior to replacing
batteries to avoid memory loss (when
using built-in 8MB SDRAM memory).
Note:
a) Do not mix old and new batteries. Replace
all of the batteries at once. Use Alkaline
Batteries only.
b) Remove the batteries if the camera will not
be used for some time. This will save the
battery life.
9
