A
Alarm Windows/Indicators:
Each 24mm x 22mm window is equipped with a supper bright, Multi-color LED. The standard system
supports Red, Green and Yellow (RGY set) LED colors. User can assign a color to each LED state
according to the application requirement for Normal and Abnormal conditions as shown below. The color
of each LED can be set via the Alcon software.
YELLOW
YELLOW
YELLOW
YELLOW
OFF
GREEN
YELLOW
GREEN
RED
RED
RED
GREEN
OFF
OFF
RED
GREEN
GREEN
RED
LED Color/Status
while
NORMAL
LED Color/Status
while
ABNORMAL
B
Alarm Labels:
The Alarm Labels are field-configurable easily by printing on translucent film. This film will be placed
behind the front panel. Number of characters of each window are shown above for different font sizes.
FONT4
FONT141
FONT141
FONT141
FONT141
22mm
24mm
FONT111
FONT1111Z
FONT1111Z
FONT1111Z
FONT1111Z
22mm
24mm
FONT12X
FONT121211
FONT121211
FONT121211
FONT121211
22mm
24mm
FONT121211
FONT121211
FONT12
FONT1212
FONT1212
FONT1212
FONT1212
22mm
24mm
FONT3
FONT13X
FONT13X
FONT13X
FONT13X
22mm
24mm
Size 14
Size 13
Size 10
Size 1
1
Size 12
FONT12X
22mm
24mm
Size 9
FONT9999999
FONT9999999
FONT9999999
FONT9999999
FONT9999999
FONT9999999
FONT9999999
C
System Ready Indicator:
When the entire system is functioning properly, this LED goes On and Off smoothly. A common Relay can
also be assigned to this indicator to be wired to a 3rd party devices.
Power Indicators:
These two LEDs show the availability and health of power supplies 1 & 2. A common Relay can also be
assigned to these indicators as power failure alarm to a 3rd party device.
Group 1 & Group 2 Alarm Indicators:
These two LEDs show the status of the Alarm Horn of each group. A common Relay can also be assigned
to these indicators to be wired to external horns or 3rd party devices.
Group 1 & Group 2 Common Alarm Indicators:
These two LEDs show the status of Common Alarm Horn of each group. A common Relay can also be
assigned to these indicators to be wired to external horns or 3rd party devices.
Spare Indicator:
Not in service in this unit.
J
Built-in Pushbuttons:
There are six pusbuttons available on the front panel. “Acknowledge”, “Reset” and “Mute” are the standard
buttons to control the alarm process. “Test” button is also available for system function and lamp testing.
There are also two additional buttons “F1” and “F2” for additional functions including:
Brightness Control:
The LEDs’ light can be set from 10 to 100 percent. To set the brightness, press and
hold the F1 button and at the same time, press the Test button continuously to reach to the suitable light.
Internal Buzzer volume control:
The volume of the buzzer can be set from 10 to 100 percent. To set the
volume, press and hold the F1 button and at the same time, press the Mute button continuously to reach to
the suitable volume.
K
Front Panel Mounting Screws:
The Front Panel will be secured with easy to use screws with no need to any tools.
L
AIC400 Series Alarm Annunciator
D
E
F
G
H
I
(6)
