Apertura Edena, Руководство пользователя

Страница: 8 / 12

AperturA une marque de Stentor SAS | www.apertura-audio.com 8
FRANCAIS
ENGLISH
Remove the foam with the front grille.
Pull out the two foams end pieces holding the speakers, being careful not to separate them too much, to
prevent speakers falling down.
Raise speakers on one of their foam blocks, with the draw-string of the protective bag at the top.
Lower the protective bag and mount the accessories following the drawing bellow.
The loudspeakers stand on their central cone, on the axis of the center of gravity. The four other spikes are
for stability only. These spikes will allow vertically to be achieved even on the most uneven of floors.
Note
: It is not necessary to use force when mounting the six metal stand screws. Over tighten them will not
improve performances, but increase the risk of insert damage.
Including in the accessory
carton:
 Front metal stand
 Back metal stand
 4 spikes sets with double
knurled nuts

Center cone with knurled
nut and headless screw

6 screws M5x30

One M5 Allen key
 Gloves