Home Theater One Wireless Transmitter
12
9. Connections
Connect your Home Theater sources to the Home Theater One Wireless
Transmitter inputs that fit them best. See the examples on the following pages.
Ant 2
Ant 1
HDMI 2
HDMI 1
HDMI Out
Aux 1
Aux 2
HDMI 3
Coaxial
Optical
DC + 12V
USB
Firmware
Update
Port
Two Stereo Mini-
Plug Audio INPUTS
for iPods, CD Play-
ers, etc..
HDMI
OUTPUT
to TV
HDMI
INPUT from
Disc Player
Additional
HDMI INPUTS
Coaxial
Digital Audio
INPUT
Optical
Digital Audio
INPUT
Place Antennae in Vertical Position
Owner’s Guide
17
10.4 Changing Volume
To change the current volume, use the VOL buttons on the remote control.
You’ll see the status update in the volume section of the front panel:
VOL+ — Pressing increases the volume. Pressing and holding quickly increases
the volume.
VOL - — Pressing decreases the volume. Pressing and holding quickly decreases
the volume.
MUTE — Toggles mute on and off.
10.5 MyZone Optimization
MyZone custom tailors the sound from all the speakers to your location in the
room. Just point the remote at the center speaker and press the MyZone button.
You might hear some faint rapid clicks while MyZone is in process. This is
normal and the process should only take a few seconds.
MyZone finds your location and automatically adjusts the audio delay and
individual speaker volume and optimizes the audio to your seating location to
make it the best seat in the house.
If the display shows "Please Retry," make sure the remote and the MyZone
sensor are pointed at the center speaker, and there is nothing between the
remote and front-left, center, and front-right speakers. If this happens, please
press the MyZone button again to repeat the process.
If the display shows "Unavailable," the system had a difficult time locating your
speakers. Make sure each speaker can physically "see" each other, remove the
grill from the center speaker, and run the "Refresh Map" command in the menu
(see Menu section). When the system successfully locates all of the speakers,
MyZone will operate.
10.6 Menu
To enter the menu, press MENU on the remote control. Press MENU again or
LEFT ARROW and RIGHT ARROW on the remote control to choose between
the menu items. Press ENTER to select the current menu item. At any time,
press EXIT to return to the main screen.
Note:
The Home Theater One Wireless Transmitter uses SpeakerFinder technology to
automatically set up the system at power-up. The options provided in the menus
are for additional fine tuning, and are not required for use.
