Apera Instruments SX811-SS, Инструкция по эксплуатации

Страница: 20 / 24

- 17 -
1 — Meter serial number
2 — Stored value display area
3 — Keys
Clear — press this key to clear the data
Download — press this key to download the data from the meter to the computer, pH, mV,
conductivity and dissolved oxygen are classified in the file.
Export — press this key to export the stored value to Microsoft Excel file
Exit — press this key, PC-Link program exits from the computer interface
7.3 Load software
Please follow the following steps to load PC-Link to the computer:
Open “PC-Link” file→double click “Setup” program → click “OK”→ click icons (refer to Diagram – 22) →
click “Continue”→ click “Confirm”.
7.4 Automatic connection port
Connect USB cable to the meter and the computer, open PC-Link program, program interface shows,
automatic connection is done after a few seconds. icon shows at the left bottom of LCD.
Note: for re-connection after turn-off, the computer can not recognize the software automatically
and please re-open the software interface.
Besides, this software only recognizes 1-16 port numbers. For other port numbers, please set in “ device
manager” of the computer.
7.5 Run software
Upload the stored value
Press “ Download ” key, all the data stored in the meter is downloaded to the computer. pH and mV are
sorted in the program.
7.6 Storage during operation
During operation, press key to store or set timing storage. The measuring information is
downloaded to the computer through USB and will not be stored in the meter. The stored data during
operation is the same as the data shown on the meter.
Diagram -22