Apelson UBMFTZ60SS, Руководство пользователя

Страница: 17 / 24

17
INSTALLATION
A Switched Fused Connection Unit to BS 1363 Part 4 is
recommended
The fuse must be rated at 32 Amps.
The wires in the mains lead are coloured in accordance
with the following code:
Brown = L - Live
Blue = N - Neutral
Green and Yellow = - Earth
The connection point must be placed in a position adjacent
to the appliance so as to be readily accessible for an
engineer in the event of a breakdown.
Disconnect the appliance from the mains supply before
carrying out any kind of maintenance or cleaning.
FIXING THE SINGLE OVEN
VENTILATION
An air circulation slot that should be cut into the plinth if
fitted. See below for air circulation requirements.
It is essential when installing your oven there is adequate
air circulation around the appliance to ensure the correct
operation of the appliance. Inadequate air circulation will
greatly impair the operation of the appliance and can
affect surround cabinets due to the rise in temperature.
Once the oven has been lifted into place insert the 4x
plastic washers into the holes located within the sides
of the metal casing of the oven as shown and secure
with 4x screws [Ø4mm x 25mm].
Also ensure
that you adjust
the furniture
doors adjacent
to the sides
of the oven
so there is a
5 - 7mm gap
between them,
otherwise heat
displaced from
the oven might damage the furniture door.
THE APPLIANCE IS NOW READY TO USE.
570mm
600 mm
200mm
10mm
UB MFTZ60SS