4
THERE ARE TWO PARTS TO INSTALLING THE RO SYSTEM:
Part I.
Assemble the filters and housings onto the main system
Part II.
Installing the system
Note: The RO Membrane Element has already been pre-installed.
PART I. ASSEMBLE THE FILTERS AND HOUSINGS ONTO THE MAIN SYSTEM
Remove plastic/paper wrappings on the 3 filters, put them into the 3 housings, and assemble the
housings onto the main system as follow:
1.
See
Fig. 1
Stand the 3 housings upright. Make sure each housing has a rubber O-ring in its
groove.
Put the APEC Sediment filter (1-SED10) into the “1
st
stage” housing on the right.
Put the APEC Carbon filter (23-CAB10) into the “2
nd
stage” housing in the middle.
Put the APEC Carbon filter (23-CAB10) into the “3
rd
stage” housing on the left.
2.
See
Fig. 2
Starting from the 3
rd
stage housing on the left, hand twist the housing onto the main
system turning counterclockwise, one by one, for all 3 housings.
3.
See
Fig. 3
Use the wrench provided to completely tighten the housing starting from 1st-stage.
Repeat this step for the 2
nd
stage housing in the middle, and for the 3
rd
stage housing
on left.
Note:
For some people it is easier to use the wrench with the system laid down
(face up).
4.
See Pg. 3
Remove 2 end plugs (white color) from Point 10 & 12
Fig. 1
Fig. 2
Fig. 3
turn counter-clockwise
to tighten
3rd
Stage
3rd
Stage
2nd
Stage
1st
Stage
Use
Wrench
Use
